Daikin FDYQN200LCV1 Three Phase 19.5kW Ducted Air Conditioner

The Daikin FDYQN200LCV1 Three Phase inverter ducted air conditioner provides powerful reverse-cycle heating and cooling for large residences, commercial offices and other high-demand conditioned spaces. Paired with the matching RZQ200MY1 outdoor unit, this combination delivers 19.5kW of rated cooling capacity and 22.4kW of rated heating capacity for demanding year-round climate-control requirements.

The FDYQN200LCV1 indoor unit is generally concealed within a roof, ceiling or suitable services area. Conditioned air is distributed through professionally designed ductwork to outlets positioned throughout the selected zones. This creates a clean interior appearance because the main indoor equipment remains out of sight.

Complete FDYQN200LCV1 and RZQ200MY1 Combination

This product listing combines the FDYQN200LCV1 concealed indoor unit with the matching RZQ200MY1 outdoor unit. It is a three-phase reverse-cycle inverter system using R410A refrigerant. A BRC1E63 wired controller may also form part of the proposed package, subject to confirmation in the final written quotation.

Both equipment model numbers are displayed clearly so homeowners, builders, facility managers and air-conditioning professionals can identify the correct combination. The available three-phase electrical supply, system capacity and installation conditions must be checked by qualified professionals before the order is approved.

Key Product Specifications

Brand	Daikin
Indoor Unit	FDYQN200LCV1
Outdoor Unit	RZQ200MY1
Controller	BRC1E63 wired controller, subject to package confirmation
Rated Cooling Capacity	19.5kW
Rated Heating Capacity	22.4kW
Refrigerant	R410A
Power Supply	Three phase
System Type	Reverse-cycle inverter ducted air conditioner

High-Capacity Inverter Performance

The Daikin FDYQN200LCV1 Three Phase system is intended for properties with significant heating and cooling requirements. Inverter technology allows compressor operation to adjust according to current demand. Instead of operating only at maximum output and repeatedly switching on and off, the system can vary its output as indoor conditions change. When correctly selected and commissioned, this supports controlled operation and consistent indoor comfort.

Capacity should never be selected from floor area alone. A professional heat-load assessment should consider insulation, ceiling height, window area, building orientation, local climate, occupancy and heat-producing equipment. These factors can substantially affect the heating and cooling capacity required for a particular building.

Three-Phase Electrical Requirements

This combination requires a compatible three-phase electrical supply. A licensed electrician or appropriately qualified air-conditioning professional should inspect the existing electrical service and switchboard before the equipment is ordered. Electrical upgrades, circuit protection, isolators, cabling and switchboard modifications are not included unless specifically itemised in the accepted quotation.

The RZQ200MY1 outdoor model must be matched with the listed indoor unit and an appropriate electrical supply. Customers should not substitute another outdoor unit or assume that a similarly sized single-phase model is interchangeable without obtaining professional technical confirmation.

Discreet Whole-Property Comfort

The concealed design of the FDYQN200LCV1 allows heating and cooling to be delivered without placing separate wall-mounted indoor units throughout the property. In a typical installation, the supply-air outlets, return-air grille and controller are the main components visible from inside the conditioned areas.

Professional duct design is essential. The installer must calculate airflow requirements and determine suitable duct sizes, outlet locations and return-air capacity. Correct airflow balancing helps distribute conditioned air effectively and can reduce avoidable comfort problems and operating noise.

Optional Zoning and Controls

A compatible zoning system may allow selected areas to operate independently. Frequently occupied spaces can be prioritised while unused zones remain closed, subject to the minimum-airflow requirements established during system design. The appropriate number of zones depends on the building layout, duct configuration and selected controls.

Zone motors, sensors, smart controllers, Wi-Fi interfaces and third-party zoning products are not automatically included. Compatibility should be checked before accessories are purchased, and every required component should be listed separately in the quotation.

BRC1E63 Wired Controller

The BRC1E63 is a wall-mounted wired controller designed to provide convenient access to important air-conditioning functions. It provides a central control point for a compatible Daikin ducted system. Package inclusions can vary, so the controller should only be considered included when it appears on the final accepted quotation.

Professional System Design

A complete installation involves more than the indoor and outdoor equipment. The installer must assess refrigeration pipework, condensate drainage, electrical requirements, duct design, airflow, zoning and outdoor-unit placement. The outdoor unit requires adequate airflow, manufacturer-specified clearances and suitable access for future servicing.

The final equipment location and duct layout should be confirmed following a site assessment. Structural limitations, ceiling access, existing services, neighbouring properties and local requirements may influence the installation design and total project cost.

What Is Included?

This listing covers the FDYQN200LCV1 indoor unit and RZQ200MY1 three-phase outdoor unit. Inclusion of the BRC1E63 wired controller remains subject to package confirmation. Ductwork, outlets, return-air grilles, zoning components, refrigeration pipework, electrical work, drainage, mounting hardware, delivery and installation are not included unless specifically stated.

Product photographs are representative and may not show the exact dimensions, cabinet details, electrical connections or model labels of the supplied equipment. Always rely on the written model numbers, technical information and accepted quotation when confirming an order.

Professional Installation and Warranty

The Daikin FDYQN200LCV1 Three Phase system must be installed and commissioned by appropriately licensed professionals in accordance with Australian requirements and Daikin instructions. Warranty eligibility and coverage are subject to Daikin Australia’s applicable conditions, correct installation, permitted use and any registration or documentation requirements.

For manufacturer information, visit the official Daikin inverter ducted air-conditioning page. You can also browse our air-conditioning systems or contact Air Conditioning Trade for assistance.

Request a Quote for the Daikin FDYQN200LCV1 Three Phase

Choose the Daikin FDYQN200LCV1 Three Phase with the RZQ200MY1 outdoor unit when your project requires a high-capacity 19.5kW R410A three-phase ducted solution. Contact Air Conditioning Trade to discuss availability, delivery and professional installation options. We can help assess whether this combination is suitable for your property and prepare a tailored quotation.