Daikin FDYAN100AV1 10.0kW Inverter Ducted System

The Daikin FDYAN100AV1 is a reverse-cycle inverter ducted air-conditioning system providing 10.0kW nominal cooling capacity and 12.5kW nominal heating capacity. It is designed to deliver discreet heating and cooling by concealing the indoor unit within a suitable roof or ceiling space and distributing conditioned air through professionally designed ductwork.

This single-phase equipment package combines the Daikin FDYAN100AV1 concealed ducted indoor unit, RZA100C2V1 outdoor condenser and BRC1E63 wired wall controller. Together, these components form the principal equipment required for a compatible Daikin inverter ducted installation.

Ductwork, zoning controls, supply-air outlets, return-air equipment, refrigeration piping, electrical work and installation labour are not included unless they are expressly listed in the customer’s quotation.

Daikin FDYAN100AV1 and RZA100C2V1 specifications

Brand	Daikin
Series	FDYAN Inverter Ducted
Indoor unit	FDYAN100AV1
Outdoor unit	RZA100C2V1
Wired controller	BRC1E63
Nominal cooling capacity	10.0kW
Nominal heating capacity	12.5kW
Power supply	Single phase
System type	Reverse-cycle inverter ducted
Refrigerant	R32

The Daikin FDYAN100AV1 should be selected according to the calculated heating and cooling requirements of the property. A qualified air-conditioning professional must confirm the capacity, duct design, electrical requirements and installation conditions before ordering.

Discreet whole-home air conditioning

A ducted air-conditioning system is designed to keep most of the indoor equipment hidden. The concealed indoor unit is typically installed within an accessible roof or ceiling space, while conditioned air is distributed to selected rooms through insulated ducts and outlets.

This arrangement provides a clean interior appearance because individual wall-mounted indoor units are not required in every room. The visible indoor components usually consist of supply-air outlets, a return-air grille and wall-mounted controls.

The 10.0kW cooling capacity may be considered for selected medium-sized homes, larger townhouses or defined groups of residential areas. The system’s suitability must be confirmed through a professional heat-load assessment.

Reverse-cycle heating and cooling

The FDYAN100AV1 and RZA100C2V1 combination provides both cooling and heating. During warmer conditions, the system can cool the selected areas. During colder weather, reverse-cycle operation enables heated air to be delivered through the same ductwork and outlets.

Inverter technology enables the equipment to adjust its operation as the heating or cooling demand changes. This allows the system to respond as the property approaches the selected temperature rather than operating only through repeated maximum-output starting and stopping.

Actual comfort, efficiency and running costs depend on building construction, insulation, window area, thermostat settings, zoning behaviour, weather conditions, equipment maintenance and ductwork quality.

Compact concealed indoor unit

The Daikin FDYAN series uses a low-profile indoor unit designed for installation in appropriately sized roof or ceiling spaces. This can be particularly useful in modern homes where the available installation area may be restricted.

Before purchasing the Daikin FDYAN100AV1, the installer must verify that the proposed location provides adequate room for the indoor unit, duct connections, condensate drainage and ongoing service access.

The unit should not be permanently enclosed without an appropriate access opening. Filters, drainage equipment, electrical connections and internal components may require inspection or maintenance throughout the system’s operating life.

R32 refrigerant system

The FDYAN100AV1 and RZA100C2V1 combination uses R32 refrigerant. Refrigeration pipework, pressure testing, evacuation, commissioning and any refrigerant handling must be completed by appropriately licensed professionals.

Pipework must be correctly sized, insulated and installed within Daikin’s permitted limits. Incorrect refrigeration work may reduce system performance, increase operating costs, cause reliability problems and potentially affect warranty eligibility.

BRC1E63 wired controller

The BRC1E63 wired controller provides a fixed interface for operating the ducted system. It enables the main system settings to be accessed from a convenient wall-mounted location.

The equipment schedule supplied for this package identifies the BRC1E63 controller. Before publishing a final package price, confirm that the controller is physically included rather than listed only as a recommended control option.

Advanced zoning controllers, Wi-Fi modules, additional room sensors and third-party smart-home integrations are not automatically included unless they are specifically stated in the quotation.

Optional zoning

A professionally designed zoning system can divide the ducted installation into separately managed areas. This may allow occupants to direct conditioned air to selected rooms instead of supplying every area continuously.

The zone arrangement must be designed around the property layout, system capacity and required airflow. Closing too many outlets without appropriate airflow management may create excessive noise, reduce performance or contribute to equipment faults.

Zoning controllers, motorised dampers, sensors and associated wiring are separate components unless expressly included in the equipment or installation package.

Professional ductwork design

Ductwork design has a direct effect on airflow, comfort, noise and operating efficiency. The installer must determine the appropriate duct sizes, insulation, branch arrangement, outlet locations and return-air requirements.

Poorly designed, damaged or inadequately insulated ductwork may cause uneven room temperatures, excessive noise and avoidable energy loss. The complete duct system should be installed, tested and balanced by experienced professionals.

Potential applications

The Daikin 10.0kW ducted system may be considered for appropriately assessed applications such as:

• Selected medium-sized homes
• Larger townhouses
• Multiple bedrooms and living areas
• Open-plan living and dining areas with adjoining rooms
• Residential renovation or replacement projects
• Selected small professional or light-commercial spaces

These applications are general examples only. Insulation, windows, ceiling height, orientation, afternoon sun, occupancy, local climate and the number of conditioned areas must be assessed before confirming capacity.

Package inclusions

• One Daikin FDYAN100AV1 concealed ducted indoor unit
• One Daikin RZA100C2V1 single-phase outdoor unit
• One Daikin BRC1E63 wired wall controller, subject to package confirmation

Items not included

Unless expressly included in the quotation, the following items are not supplied as part of the standard equipment package:

• Supply and return-air ductwork
• Ceiling, wall or floor outlets
• Return-air grille and filter box
• Zoning controller, motors or additional sensors
• Refrigeration pipework and insulation
• Condensate drainage materials
• Electrical circuit, isolator and cabling
• Outdoor mounting bracket or concrete base
• Installation labour and commissioning
• Ceiling, roof or building modifications

Professional installation required

The Daikin FDYAN100AV1 must be installed and commissioned by appropriately qualified and licensed professionals. The installer must confirm equipment positioning, ductwork requirements, drainage, electrical supply, refrigeration pipe lengths and manufacturer clearances.

The RZA100C2V1 outdoor condenser requires adequate airflow and suitable service access. It should not be positioned where discharged air can repeatedly circulate back through the outdoor coil.

All work must comply with Daikin’s current installation instructions, relevant Australian standards, electrical regulations, refrigerant-handling requirements and applicable local building rules.

Warranty information

The equipment may qualify for Daikin Australia’s applicable manufacturer warranty when purchased through an approved supply channel and installed, commissioned, operated and maintained according to the manufacturer’s requirements.

Warranty duration, eligibility, registration requirements and exclusions should be confirmed through current Daikin Australia documentation. Keep the invoice, installer’s details, commissioning records, model numbers and serial numbers for future reference.

Official Daikin product information

For current features, brochures and technical documentation, visit the official Daikin Inverter Ducted product page.

Frequently asked questions

Does the package contain both model numbers?

Yes. The equipment package contains the FDYAN100AV1 indoor unit and RZA100C2V1 outdoor unit, subject to final supplier confirmation.

Is the BRC1E63 controller included?

The supplied equipment schedule identifies the BRC1E63 controller. Confirm that it is physically included in the package price before publishing or accepting an order.

Does this product include ductwork?

No. Ductwork, outlets, return-air equipment and zoning components are separate unless expressly included in the quotation.

Is installation included?

No. This is an equipment package unless professional installation is specifically included in the quotation.

Is this a single-phase system?

Yes. The supplied product information identifies the FDYAN100AV1 and RZA100C2V1 combination as single-phase equipment.

Is 10.0kW suitable for my property?

A professional heat-load assessment is required. Floor area alone cannot determine whether this system is correctly sized.

Request a Daikin ducted-system quotation

Browse our complete range of air-conditioning systems, or contact Air Conditioning Trade for availability and assistance preparing a complete package around the Daikin FDYAN100AV1.

Specifications, package contents and warranty conditions may change. Product images may be representative. Confirm current Daikin documentation and all quotation inclusions before ordering.

Product image is representative only. Actual equipment appearance, controller design and dimensions may vary.