Daikin FDYAN71AV1 7.1kW Inverter Ducted System

The Daikin FDYAN71AV1 is a reverse-cycle inverter ducted air-conditioning system delivering 7.1kW nominal cooling capacity and 7.5kW nominal heating capacity. Designed for discreet multi-room comfort, the indoor unit can be concealed within a suitable roof or ceiling space while conditioned air is distributed through professionally designed ductwork and outlets.

This single-phase equipment package combines the Daikin FDYAN71AV1 concealed indoor unit, RZA71C2V1 outdoor condenser and BRC1E63 wired wall controller. Together, these components form the primary equipment required for a compatible Daikin inverter ducted installation.

Ductwork, zoning components, supply-air outlets, return-air grilles, refrigeration pipework, electrical work and installation labour are not included unless they are expressly listed in the customer’s quotation.

Daikin FDYAN71AV1 and RZA71C2V1 specifications

Brand	Daikin
Series	FDYAN Inverter Ducted
Indoor unit	FDYAN71AV1
Outdoor unit	RZA71C2V1
Wired controller	BRC1E63
Nominal cooling capacity	7.1kW
Nominal heating capacity	7.5kW
Power supply	Single phase
System type	Reverse-cycle inverter ducted
Refrigerant	R32

The Daikin FDYAN71AV1 should be selected according to the calculated heating and cooling requirements of the property. A qualified air-conditioning professional must confirm the capacity, duct design and installation conditions before the equipment is purchased.

Discreet whole-home or multi-room comfort

A ducted air-conditioning system is designed to keep most of the equipment concealed. The indoor unit is generally positioned within a suitable roof or ceiling space, while conditioned air travels through ductwork to outlets installed in selected rooms.

This arrangement provides a clean interior appearance because individual wall-mounted indoor units are not required in every room. The visible indoor components are normally limited to the supply-air outlets, return-air grille and wall-mounted control equipment.

The 7.1kW cooling capacity may be considered for certain smaller or medium-sized homes, apartments, townhouses or defined groups of rooms. Suitability must be determined through a professional assessment rather than using floor area alone.

Reverse-cycle heating and cooling

The FDYAN71AV1 and RZA71C2V1 combination provides both cooling and heating through one ducted platform. During warmer weather, the system can cool the selected areas. During colder conditions, reverse-cycle operation enables heated air to be delivered through the same ductwork and outlets.

Inverter technology enables the system to vary its operating output as heating or cooling demand changes. This allows the equipment to respond as the property approaches the selected temperature rather than relying only on repeated full-power starting and stopping.

Actual comfort, performance and electricity consumption depend on several factors, including building construction, insulation, thermostat settings, zoning behaviour, weather conditions, duct quality and equipment maintenance.

Compact concealed indoor unit

The Daikin FDYAN series uses a low-profile concealed indoor unit designed for installation in appropriately sized roof or ceiling spaces. This can be particularly useful in modern properties where available roof space may be restricted.

Before purchasing the Daikin FDYAN71AV1, the installer must verify that the proposed location provides enough room for the indoor unit, duct connections, condensate drainage and required service access.

The unit must not be permanently enclosed without an appropriate access opening. Filters, drainage components, electrical connections and internal equipment may need inspection and maintenance throughout the life of the system.

R32 refrigerant system

The FDYAN71AV1 and RZA71C2V1 system uses R32 refrigerant. Refrigerant handling, pipe installation, pressure testing, evacuation and system commissioning must be undertaken by appropriately licensed professionals.

The refrigeration pipework must be correctly sized, insulated and installed within Daikin’s permitted length and height limits. Incorrect installation can reduce performance, contribute to higher operating costs and potentially affect warranty eligibility.

BRC1E63 wired wall controller

The BRC1E63 wired controller provides a fixed interface for operating the Daikin ducted system. It enables the main system settings to be accessed from a convenient wall-mounted location.

The supplied equipment schedule identifies the BRC1E63 controller for this package. Air Conditioning Trade should confirm that the controller is physically included in the quoted price before publishing or accepting an order.

Advanced zoning controls, Wi-Fi modules, additional sensors and smart-home integrations are not automatically included unless specifically listed in the product package or quotation.

Optional zoning

A zoning system can divide the ducted installation into separately managed areas. This may allow conditioned air to be directed to selected rooms instead of operating every outlet continuously.

The zone configuration must be designed around the property layout, system capacity and required airflow. Closing too many zones without suitable airflow management may create excessive noise or affect system performance.

Zoning controllers, motorised dampers, additional temperature sensors and associated wiring are separate components unless expressly included in the quotation.

Importance of professional ductwork design

Ductwork design directly affects the completed system’s airflow, noise, comfort and operating efficiency. The installer must correctly determine the duct sizes, insulation, branch arrangement, outlet positions and return-air requirements.

Poorly designed, damaged or inadequately insulated ductwork may cause uneven room temperatures, excessive airflow noise and unnecessary energy loss. The completed system should be professionally installed and balanced.

Potential applications

The Daikin 7.1kW ducted system may be considered for appropriately assessed applications such as:

• Smaller or medium-sized homes
• Apartments and selected townhouse layouts
• Combined bedroom and living zones
• Residential renovation projects
• Replacement of an appropriately sized existing system
• Selected small office or professional spaces

These applications are general examples only. Ceiling height, insulation, windows, sun exposure, occupancy, room orientation and local climate must be considered before confirming capacity.

Package inclusions

• One Daikin FDYAN71AV1 concealed ducted indoor unit
• One Daikin RZA71C2V1 single-phase outdoor unit
• One Daikin BRC1E63 wired wall controller, subject to package confirmation

Items not included

Unless expressly shown in the quotation, the following items are not included:

• Supply and return-air ductwork
• Ceiling, wall or floor outlets
• Return-air grille and filter box
• Zoning controller, zone motors or additional sensors
• Refrigeration pipework and insulation
• Condensate drainage materials
• Electrical circuit, isolator and cabling
• Outdoor mounting bracket or concrete base
• Installation labour and commissioning
• Ceiling, roof or building modifications

Professional installation required

The Daikin FDYAN71AV1 must be installed and commissioned by appropriately qualified and licensed professionals. The installer must confirm equipment placement, duct design, refrigeration requirements, drainage, electrical supply and manufacturer clearances.

The outdoor RZA71C2V1 unit requires sufficient airflow and suitable service access. It should not be installed where discharged air can continually recirculate through the condenser.

All work must comply with Daikin’s installation instructions, applicable Australian standards, electrical requirements, refrigerant-handling regulations and local building rules.

Warranty information

The equipment may qualify for Daikin Australia’s applicable manufacturer warranty when purchased through an approved supply channel and installed, commissioned, operated and maintained according to the manufacturer’s requirements.

Warranty duration, eligibility, registration requirements and exclusions should be confirmed using current Daikin Australia documentation. Keep the invoice, installer’s details, commissioning records, model numbers and serial numbers.

Official Daikin information

For current series information, brochures and technical documentation, visit the official Daikin Inverter Ducted product page.

Frequently asked questions

Does this package include both model numbers?

Yes. The equipment package contains the FDYAN71AV1 indoor unit and RZA71C2V1 outdoor unit, subject to final supplier confirmation.

Does the package include ductwork?

No. Ductwork, outlets, return-air equipment and zoning components are separate unless expressly included in the quotation.

Is installation included?

No. This is an equipment package unless the quotation specifically includes professional installation.

Is this a single-phase system?

Yes. The provided equipment schedule identifies this package as a single-phase system.

Is 7.1kW suitable for my property?

A professional heat-load assessment is required. Floor area alone cannot determine whether this system is correctly sized for a property.

Request a Daikin ducted-system quotation

Browse our complete range of air-conditioning systems, or contact Air Conditioning Trade for availability and assistance preparing a package around the Daikin FDYAN71AV1.

Specifications, package contents and warranty conditions may change. Product images may be representative. Confirm current Daikin documentation and all quotation inclusions before ordering.

Product image is representative only. Actual equipment appearance, controller design and dimensions may vary.